StecaGrid Control
StecaGrid Control monitors a system with the maximum power of 3.600 Watt. For the StecaGrid MiniString inverters, the StecaGrid Control shows the amount of energy produced by the solar system.
The StecaGrid Control monitors the performance of the system. It shows the generated kWh and the status of the system and has (optional) safety features (G83/1).
StecaGrid Remote
In addition to the StecaGrid Control an external wireless communications unit is available: the StecaGrid Remote. It shows the current output, the system status and the amount of energy generated on a daily, weekly, monthly and yearly basis.
StecaGrid Vision
Display Unit
|
One photovoltaic system – one display The philosophy behind the StecaGrid Vision display unit is to provide the system operator with a representation of the entire system's data. In the default display, the output and yields of all connected StecaGrid 10 000 3ph devices are shown as combined totals. Thus, the operator does not need to go from one inverter to the next, reading out the values individually and adding them up themselves. Naturally, it is also possible to view and compare data from individual inverters. Up to 20 inverters can be connected One to 20 StecaGrid 10 000 3ph inverters can be connected to the optional StecaGrid Vision display unit. The wired connections between the inverters and to the display unit are realised via Steca's own communication bus. Easy to operate The StecaGrid Vision impresses with its design. It is operated by means of four modern capacitive buttons. Graphic curves show the energy yields from the system as a whole, and from individual inverters, thus providing information at a glance, regarding the performance over the course of the day. In addition, StecaGrid Vision has a data logging function, which also enables querying of historical data. Error messages regarding the system as a whole, as well as individual inverters, are shown in plain text. |
||
|
Product features
Displays
Operation
|
||